How to used OBDSTAR MT502 test Tesla Model Y Compressor

 How to use OBDSTAR MT502 to work with Tesla Compressor to test and verify by bench?

Check the step-by step guide below.

OBDSTAR MT502 overview:

MT502 is an automotive compressor test platform by BENCH newly developed by OBDSTAR, which almost can power on air conditioning compressor by sending CAN BUS signal, supporting most brands of electric scroll compressors. It comes with simple and intuitive menu guidance to allow you to quickly master the equipment operation, and supports Wi-Fi connection to the internet, one-click software upgrade. Very easy to use!

OBDSTAR MT502 Tesla compressor support list:

Area

Car maker

Car model

Compressor manufacturers

Compressor model

Americas

TESLA

MODEL-S

HANON

HES33

Americas

TESLA

MODEL-X

HANON

CA600FPFAA03

Americas

TESLA

MODEL-Y

DENSO

042400–1375

Americas

TESLA

MODEL-Y

DENSO

042400–1376

Americas

TESLA

MODEL-Y

Americas

TESLA

MODEL-3

HANON

HES33 1088198–00-L

Americas

TESLA

MODEL-3

Here we take Tesla Model-Y SANDEN 1582668–00-F as an example.

Prepare device and compressor:

OBDSTAR MT502 Automotive Compressor Test Platform Tool

OBDSTAR P004 Adapter+ ECU Clone Jumper

OBDSTAR High Voltage Jumper

High Voltage DC Power

Tesla Model Y Compressor

NOTE: OBDSTAR P004 Adapter+ ECU Clone Jumper and High Voltage Jumper are in the MT502 package.

Process:

Supply power to MT502 and keep charging and communication during the process.

Then operate on OBDSTAR MT502 tablet

Tap Test Platform>> agree with disclaimer>> All>> COMPRESSOR>> COMPRESSOR V30.11 (newest software)>> TESLA>> Tesla Model-Y SANDEN 1582668–00-F

Click Guide at the bottom left to check the best detection method

And click Pinout to check the related wiring diagram

Connect OBDSTAR P004 adapter and ECU clone jumper, and connect it to Tesla compressor

Connect P004 adapter and MT502 via the main cable

Connect High Voltage DC Power and Tesla compressor via the OBDSTAR High Voltage Jumper

After connection, click Start and turn on the High Voltage DC Power

It's normal for the current range to fluctuate a little around 330V.

Turn on OBDSTAR P004 adapter and click Start button on the screen

It shows "The test command has been sent (some compressors start with a delay of more than 10 seconds)".

Click Stop button on the screen

It shows "The test command has been stopped sending (some compressors start with a delay of more than 10 seconds or the power P004 be turned off)".

Turn off OBDSTAR P004 adapter

Finally, turn off the High Voltage DC Power

Done!

Video guide:

https://youtu.be/jdDRqbUrR_o

OBDSTAR MT502 Automotive Compressor Test Platform Tool:

https://www.obdexpress.co.uk/wholesale/obdstar-mt502-test-platform-tool.html

www.obdexpress.co.uk

Step-by-Step Guide to OBDSTAR MS80 Odometer Recalibration for KTM 1190

 OBDSTAR MS80 Motorcycle Scan Tool is able to do odometer recalibration for KTM 93C56 chip, covering 640 LC4, 950 Adventure, 1190 Adventure, Duke 125 & Duke 200. Here's taking 2014 KTM 1 series 1190 Adventure for mileage adjustment as example.

How to check odometer with OBDSTAR MS80?

The original odometer on screen is 61000km.

Moto Diag >> KTM >> Latest version >> Diagnosis >> Select from vehicle >> 1 Series >> 1190 Adventure >> OK >> Chassis management system >> Eldor MCU(2013-) >> ECU information

Here we can see the odometer shows 60992km.

How to calibrate odometer with OBDSTAR MS80?

ODO Meter >> Agree >> KTM >> Latest version >> Select from vehicle >> 1 Series >> 1190 Adventure >> OK >> One-click repair >> H

Enter the new mileage: 20000km(12427 mile)

OK >> OK

Procedure complete.

Now the moto screen has changed to 20000km.

Go back to check ECU info again, the odometer is showing 20000km now.

Done.

www.obdexpress.co.uk