2013 VW NEC24C64 cluster calibration using obdstar odo master

Have 2013 VW NEC24C64 color screen type 2 to do cluster calibration via OBD using obdstar odo master.

How-to guide:
Use the OBD2 cable to plug obdstar odo master into the 16pin port of 2013 VW.
The dashboard light up.


Select "Cluster calibrate" menu option of odo master, search VW.


Newest version VW v31.99.


VCI is upgrading.


Initializing...


Initializing diagnostic data...


Select from type...


odometer type: NEC24C64 (2013 color screen)


Color meter.


Type 2


Read EEPROM
Please turn on ignition first, if it is a smart key, please turn off ignition and then turn it on, press "ENT" key continue.


Logging in system...

Ensure the instrument in the black state.


Reading data.


Please enter a file name to save.


Input value 24C64COD


Finish.

Read write mileage.


Note: adjustment mileage may cause the EEPROM data to be destroyed, please backup the EEPROM data first.

Logging in system...

Please input the mileage of the adjustment.


Ensure the instrument in the black state.

Writing data...

Finish.


Have new mileage value on the dashboard.

Job is done.

Thanks to obdstar ODO master for calibration cluster on 2013 VW NEC24C64 color screen type 2.
 Source:http://www.mileageprogrammer.com/obdstar-odo-master-done-2013-vw-nec24c64-cluster-calibration/

OBDSTAR Odo Master Change KM For VW Passat

How to use OBDSTAR ODOMaster change mileag for 2008 VW Passat  Step-by-step here:
youtube video demo:

Use the 16pin cable to plug OBDSTAR Odo Master into the VW Passat, the dashboard light up.

Tap "Cluster calibrate", search "VW".


VW V31.99.


VCI upgrading...


Initializing...


Select from vehicle.


Passat.


VDO K line.


Communicating...


Reading mileage... usually 2-5 minutes.


Current mileage 250000 KM, mileage is right?

Please input the mileage of the adjustment: 230000.

Adjusting mileage...
Usually 2-5 minutes.


Finish.


OBDSTAR Odo Master is really one nice VW  odometer correction tool.Odomaster can change mileage for 2013 VW:
OBDSTAR ODOMASTER: Mileage Reset For 2013 VW NEC24C64 Color Screen Type 2


Source:http://www.mileageprogrammer.com/obdstar-odo-master-done-vw-passat-odometer-correction/

(Solved)OBDSTAR X300 DP Plus mileage Correction function Can't Find

Here is the solution from OBDexpress.co.uk of can not find the odometer correction function or entire menu disappear(as shown below picture )on OBDSTAR X300 DP PLUS tablet,for when you are in trouble such as this, take it easy ,only 6 steps can solved it

1. Enter Home button, choose 【ES File Explore】

2. Click【Home】, and then click【DP】

3. After entering the DP menu, choose the SN No. file, for example, 9514XXXXXXXX–FUNCTION–MILEAGE, at the bottom of this file, there will be a 【en.cfg】, find and delete it.
4. Re-start the device
5. Enter 【upgrade】menu, then choose any of mileage correction software, download it.
6. You can see the mileage correction function and the menu appear on the X300 DP PLUS.

Hope it has helps
Good luck!

Source:http://www.mileageprogrammer.com/obdstar-mileage-adjustment-function-is-disapper/

OBDSTAR X300M update Fiat V31.14 odometer correction via OBD

OBDSTAR X300M free update Fiat odometer correction software V31.14.
Content:
M1_ODFiat 31.14
M3_ODFiat 31.14
M4_ODFiat 31.14

After updating obdstar X300M, you will have Fiat V31.14 option, here 4 images shows the update results:
OBDSTAR

The next procedure is to plug obdstar X300M to the car via the OBD2 cable, select one Fiat car model to correct odometer by following the on-screen instructions.

http://www.mileageprogrammer.com/obdstar-x300m-update-fiat-v31-14-odometer-correction-via-obd/