OBDSTAR DC706: Decode Ford SONY TMS470 Radio Effortlessly

 OBDSTAR DC706 ECU Tool with BODY/CHASSIS/OTHER V30.15 can read/write EEPROM, and read/change/off code for Ford SONY TMS470 Radio via OBD and Bench.

Preparation:

Ford SONY TMS470 Radio

OBDSTAR P004 ECU Clone Jumper

OBDSTAR P004 Adapter

Main Cable

OBDSTAR DC706 Tablet

Important!

Keep DC706 charging and communicating during the process, also ensure the internet connection is normal.

Menu path:

Select ECU Flasher>> All>> BODY/CHASSIS/OTHER>> BODY/CHASSIS/OTHER V30.15>> BRAND FORD>> MODULE RADIO

Quickly search for the corresponding radio model- Ford RADIO VISTEON SONY TMS470 (OBD/BENCH)

Operation steps:

Click [Guide] and [Pinout] to check the related operation instruction and wiring diagram separately

Connect P004 Adapter to the Ford radio via the P004 ECU Clone Jumper, and connect P004 Adapter to DC706 via the main cable

After connection, click [Start] and select [Bench] mode

Switch on OBDSTAR P004 Adapter

Click [Code Read] to read code successfully. It's 1234.

Reboot P004 Adapter, and enter the pincode 1234 on Radio to verification

Verify Pincode successfully

Click [Code Change] to input a new code 4567. Operation success

Reboot P004 Adapter, and enter the new pincode on Radio to verification

Verify Pincode successfully as well

Click [Read eeprom] to read the EEPROM data and save it after reading.

Click [Write eeprom], select load external data and choose the original eeprom data just saved to write into the Ford radio.

Besides Ford SONY TMS470, OBDSTAR DC706 also supports 6000CD NEC70F3357/ TMS470, SONY NEC70F3357 and SONY 6CD TMS470 radios. Most radio ECUs support OBD and Bench modes, only 6000CD TMS470 supports OBD and Boot modes.

Attach the OBDSTAR DC706 Ford Radio Support List below.

www.obdexpress.co.uk

Unlocking BMW Secrets: ISN Code Reading with OBDSTAR DC706

 OBDSTAR DC706 with newest ECM software V30.20 is able to clone BMW Bosch MEVD17.2.6 EXX, MEVD17.2.6 FXX, MEVD17.2.9 (require OBDSTAR P003 Adapter), CONTINENTAL MSD80, MSD85, MSD87, and MSV90 ECMs on bench. ISN code also can be read for some ECMs.

Check the detailed guide to clone BMW ECM.

i.e. MSV90 TC1796 ECM

Prepare all goods incl. OBDSTAR DC706 ECU Tool, P004 Adapter and P004 ECU Clone Jumper, main cable and BMW MSV90 ECM.

Supply power to DC706 tablet and keep charging and internet communication during the operation

Tap ECU Flasher>> All>> ECM>> ECM V30.19>> BMW>> BMW CONTINENTAL MSV90 TC1766 (BENCH)

Follow the Pinout in the tablet to connect DC706 and BMW ECM with P004 Adapter& Jumper and main cable

After the harness connection is completed, tap "Start" to enter read/write interface

Tap "Connect" to connect the server

Switch ignition off, and then press the switch button on OBDSTAR P004 adapter (turn the ignition on)

Connect ECU successfully

Then select the corresponding function to perform read and write operations

Select the corresponding option to read INT EEPROM, INT Flash (TC1796), Maps, and ISN Code separately

Disconnect DC706 ECU Tool and the original ECM, and then connect to a new BMW ECM

Then choose the original INT EEPROM, INT Flash (TC1796), and Maps data files to write into new ECM one by one

Finally, disconnect and switch the ignition off

Done!

www.obdexpress.co.uk

OBDSTAR P50 Bench Method: Swift Toyota Airbag Reset Guide

 This is a demo on how to use OBDSTAR P50 to do Toyota 89170–08110 airbag reset by bench method. Besides, P50 also supports 59 brands and 7600 ECU part no. for airbag reset. Read this article to learn to do in minutes.

Accessories Required

P50 Airbag Reset Tool

Toyota Airbag ECU

Main cable

CANFD Adapter

P004 Adapter+ P004 Jumper

* Make sure P50 Airbag Reset Tool is in charging and communication during whole process.

Operation Process

Airbag reset >> Airbag reset >> Latest version >> Input the part number of ECU(case insensitive, fuzzy search supported) >> TOYOTA 89170–08110(DENSO) R7F7016443[BENCH] >> Start

This function requires a CANFD adapter. Please connect the CANFD adapter before performing the corresponding function.

Remarks: Click operation instructions(Guide&Pinout) at the bottom left to check the best detection method.

There are multiple wiring methods for this ECU. Please refer to the matching wiring method to perform the corresponding functions!

Connect the harness according to the wiring diagram.

Click "ECU information" to check if the airbag part number is correct.

Click "Read DTC", there is a crash fault code.

Advance function >> Read EEPROM[R7F7016443]

This function is available by connecting the server, please ensure the Internet connection is normal.

Press "Start".

Save EEPROM file.

Operation success.

Please disconnect the 12V power supply(or turn off the ignition) and wait for 30 seconds, and then reconnect the 12V power supply(or turn on the ignition).

Press "Erase crash".

Has the "Read EEPROM" function been executed? OK

This function is available by connecting the server, please ensure the Internet connection is normal.

Choose EEPROM file

Erase crash in file…

Erase crash in file success.

Change will be written through the "Write EEPROM" function. Continue? OK

Press "START".

Operation success.

Please disconnect the 12V power supply(or turn off the ignition) and wait for 30s, and then reconnect the 12V power supply (or turn on the ignition).

Press "Erase DTC".

Erase DTC success.

After the operation is done, go back to read DTC again.

There's no crash fault codes!

Airbag reset has done.

www.obdexpress.co.uk

OBDSTAR OS 3.0 Upgrade: Clarity for Dedicated Components

 OBDSTAR Operation System 3.0 was newly released recently. The new upgrade makes the basic function faster, special function easier, and dedicated component clearer. It's available for all OBDSTAR Tablets incl. X300 DP Plus (Key Master DP Plus), X300 Pro4 (Key Master 5), OBDSTAR ODOMaster, P50, X200 Pro2, DC706, MS50/MS70/MS80, OBDSTAR iScan Series Motorcycle Diagnostic Scanners, OBDSTAR D800 A/B Marine (Jet Ski) Diagnostic Tool, and OBDSTAR MT501/MT502, etc.

How to update OBDSTAR tool to Operation System 3.0?

Turn on the OBDSTAR tablet supported

Click "Upgrade" on the main menu and complete the upgrade process.

What's new of OBDSTAR Operation System 3.0?

• Basic Function- Faster

Auto identify VIN

Auto scan vehicle

Has Maintenance Help and DTC Guide

View live data: can trigger setting to record the live data quickly

• Special Function- Easier

Support setting change, lever setup, and history checking…

• Dedicated Component- Clearer

Offer related Pinout

Operation interface is clear: click each function supported to do step by step.

www.obdexpress.co.uk