OBDSTAR P50 Reset Hyundai/ KIA 95910-N7070 Airbag by Bench

OBDSTAR P50 Airbag Reset Tool has upgraded to support Hyundai/KIA 95xxx, XC2336A, TC23xx-32F, F7F701019, R7F7015803(22 part no.) on January. The latest added ECU models please refer to the below chart.

Hyundai/KIA New Added ECU List

Feel free to contact us to get completed ECU coverage if required.

Accessories

Hyundai/KIA airbag ECU

OBDSTAR P50

Main cable

P004 adapter

P004 jumper

CANFD Adapter

Operation Procedure

Airbag reset >> Latest version >> Manual select model >> Hyundai/KIA >> Auto search part number

Note: please ensure the Internet connection is normal.

Input the part number on ECU label >> KIA 95910-N7070(Continental) R7F7015803[OBD/CANFD]

The ECU supports OBD and CANFD modes, the CANFD mode needs to be connected with CANFD adapter. Press ENTER for OBD mode, press ESC for CANFD mode.

Press ESC.

Remark: click "Operation Instruction" or "Pinout"to check detection method and wiring diagram.

Power on the P004 adapter.

Now, we can continue to check ECU info, read & erase DTC or erase crash.

As we can see, there's a crash fault code in 1st stage only frontal.

Follow the instructions to erase crash:

Please disconnect the 12V power supply and wait for 30s, then reconnect the 12V power supply.

Crash history has been erased successfully.

Hyundai/KIA 95910-N7070 Airbag reset was done.

Read also:

OBDSTAR P50 Airbag Reset Upgrade V30.33(2023.1.12)

Peugeot 407 calibrated with OBDSTAR X300M after replacing the dashboard

 The Peugeot 407 dashboard has just been replaced. Following I'm gonna use OBDSTAR X300M tool to do a mileage adjustment for this car.

As you can see, its mileage is 312885km on dashboard.

Connect X300M Cluster Calibration tool into OBD:

Vehicles >> Cluster calibrate >> Peugeot >> Peugeot V31.05 >> BSI >> Auto select

Switch ignition on.

Select "Mileage Adjustment".

Have "Read EEPROM" and "Read FLASH" functions been performed? Yes

Current mileage: 312880km.

Please confirm the mileage correctly and press ENTER to continue.

Please input the mileage of the adjustment: 186539km.

Confirm the input value again.

Press ENTER.

Reading data…

Finished!

As you can see, the dashboard has changed to be 186539km.

OBDSTAR X300M Odometer Adjustment was successful.

www.obdexpress.co.uk

Which vehicles can OBDSTAR DC706 support?

 As we know, OBDSTAR DC706 ECU tool can clone vehicle ECM, TCM and body/other system. It can read ECU info, R/W Eeprom/Dflash/Pflash/MAP, reset ECU(Virgin), calibrate mileage, read IMMO pincode, ECU recovery… via OBD or bench mode and makes ECU cloning easy. Here have collected some successful tests reports on ECM, TCM and body by using DC706.

OBDSTAR DC706 clone TCM

Audi:

• AUDI DQ200 G2 PQ: R/W INT/EXT EEPROM and INT flash, and recalibrate ODO by bench OK

Reference: OBDSTAR DC706 Clone Audi DQ200 G2-PQ TCM by Bench

• AUDI DQ400E: R/W INT/EXT EEPROM and INT flash by bench OK

DC706 with TCM V30.01 can clone Audi via bench as below. Some TCMs also can recalibrate mileage.

Benz:

• BENZ GETRAG VGS-FDCT TC1766: R/W INT eeprom, EXT eeprom and INT flash by bench OK

*Tips: When connect the DC706 and Benz TCM via the OBDSTAR P004 adapter and jumper, the Ground must be connected on TCM's cover.

OBDSTAR DC706 with TCM V30.01 can clone Benz by bench as below.

BMW:

• BMW ZF 6HP19: R/W EXT Flash by bench with P003 adapter OK

• BMW GETRAG DKG 436 GEN1 TCM: R/W INT eeprom, EXT eeprom and INT flash by bench OK

DC706 with TCM V30.01 can clone BMW by bench as below. The OBDSTAR P003 Kit Bench / Boot Adapter is required for ZF 6HP TCM.

Cadillac:

• CADILLAC GM 6L45: R/W EEPROM and Flash by obd/bench OK

Reference: OBDSTAR DC706 Read and Write Cadillac 6L45 TCM EEPROM Flash on Bench

OBDSTAR DC706 with TCM V30.00 can clone Cadillac as below. All are supported via obd/bench except ACDelco T87A SPC564A is via bench and needs OBDSTAR P003

Volvo:

• GETRAG MPS6 TC1766: R/W INT/EXT eeprom and INT flash on bench OK

DC706 with V30.00 can clone Volvo TCM as below.

OBDSTAR DC706 Clone Body and other

• FCA RFHUB/RFHM: read & write eeprom, pflash pincode by Bench with V30.00 OK

OBDSTAR DC706 Clone ECM

Buick:

• Buick ACDelco E39A ECM: R/W eeprom and flash, read showflash and Pincode by bench OK

GUZZI (Moto):

• Moto Guzzi Marelli MIU G4 95640: R/W eeprom, reset ECU and clear fault codes by bench OK

Reference: OBDSTAR DC706: Makes ECU Cloning Easy by OBD/ Bench

(also incl. FCA RFHUB/RFHM and Buick ACDelco E39A ECM)

OBDSTAR DC706 with ECM (Cars) V30.01 can clone Buick via bench as below.

OBDSTAR DC706 ECU Chip Tunning Tool with ECM (Motorcycles) V30.00 can clone Guzzi via bench as below.

To be continued…

www.obdexpress.co.uk