Pages

OBDSTAR ODOMASTER & X300 PRO4

Sunday, May 5, 2024

OBDSTAR X300 Classic G3 Adds Key for Chery Tiggo 8 Pro

 Today I’m gonna show how to program a new Chery Tiggo 8 Pro key with OBDSTAR X300 Classic G3 by OBD. You can refer to the same steps if having X300 DP Plus tablet.

Tools Required

OBDSTAR Key Master G3

M3 Cable

A New Key


OBDSTAR X300 Classic G3 Adds Chery Tiggo 8 Pro Key

Operation Steps

Connect OBDSTAR to OBD.

IMMO >> CHERY/COWIN/JETOUR/EXEED >> Latest version >> Manual select model >> TIGGO 8 PRO >> PROXIMITY >> Read PinCode >> Input 17 VIN Code

Read pincode success.


OBDSTAR X300 Classic G3 Adds Chery Tiggo 8 Pro Key
OBDSTAR X300 Classic G3 Adds Chery Tiggo 8 Pro Key

Program keys >> program new keys

If it is a blade key. Please insert it into the keyhole.

If it is a proximity key. Please put the key to be matched in the sensing area and take other keys out of the vehicle.

The sensing area may be located at:

  1. Cup holder(some models require moving the cup holder away).
  2. Below the cigarette lighter or USB port.
  3. Near the gear lever.

Please input the 8-digit pincode just read.

End of function execution!

If it is a blade key. Please pull out the key, wait 3s, and then turn on the ignition switch.

If the vehicle cannot be started, please try to clear the anti-theft box and match again!

Key programming is completed.

The new key can normally work.


OBDSTAR X300 Classic G3 Adds Chery Tiggo 8 Pro Key
OBDSTAR X300 Classic G3 Adds Chery Tiggo 8 Pro Key
OBDSTAR X300 Classic G3 Adds Chery Tiggo 8 Pro Key
OBDSTAR X300 Classic G3 Adds Chery Tiggo 8 Pro Key
OBDSTAR X300 Classic G3 Adds Chery Tiggo 8 Pro Key

www.obdexpress.co.uk

No comments:

Post a Comment