What tool should be used to adjust Benz W202 mileage in 2022

 Mercedes Benz W204 (C Class) mileage can be adjusted by OBDSTAR X300M, X300 DP Plus and Digiprog3 on the table.

1.With OBDSTAR X300 DP Plus:

Insert the key to turn on the ignition on

Connect X300 DP Plus and Benz W204 instrument

Run X300 DP Plus programmer tablet

Tap Diagprogram>> ODOMETER>> BENZ>> BENZ newest version>> C CLASS>> W204>> Odometer recalibration

Read the original kilometer is 1664km

Input the new mileage 666 to write and modify data, wait a moment

Odometer correction complete

Now the mileage on the dashboard is 640km, it's OK.

X300 DP Plus Odometer support list

With OBDSTAR X300M + MB CAN Filter 18 in 1:

Remove dashboard and plug in a MB CAN Filter before mileage correction.

After connection, operate by this path: Vehicles >> Cluster Calibrate >> Benz >> Benz V30.35 >> C series >> W204

Then follow the prompt to adjust mileage.

For the full operation steps, check Mercedes C Class W204 Odometer Adjustment via OBDSTAR X300M

NOTE:

X300M only does C class W204 mileage correction. Need luck with other W204 series. If it says "Unknown version" it means this cannot be done.

X300M Odometer support car list

With Digiprog3:

Check: Adjust Odometer for Mercedes-Benz W204 2009 with Digiprog III Digiprog3 Odometer Master

Digiprog3 support car list

Besides, xtool x100 pro2 is also a good mileage correction tool for Benz w204.

Read also:

Xtool A80 Change Instrument Display Language + Add New BE Key on Benz W204

VVDI MB Tool Replace Benz W204 ESL/ELV NEC Chip without Renewing EIS

www.obdexpress.co.uk

Obdstar X300M Tuned Odometer: Mercedes-Benz W204

 This is a guide on how to adjust Mercedes Benz C class W204 odometer with Obdstar X300M tool. It needs to remove dashboard and plug in a MB CAN Filter before mileage correction. Follow the procedure below to learn how to do.

Connect Obdstar X300M to module:

Vehicles >> Cluster Calibrate >> Benz >> Benz V30.35 >> C series >> W204

Switch ignition on.

X300M starts reading…

Current mileage: 3872km

As we can see, the original car mileage is 3872km, now we're gonna adjust it to 1314km.

Press "ENT" to input new mileage: 1314km.

Wait for writing data & modifying mileage…

Adjustment complete.

Switch ignition off then on.

We can see the new mileage on dashboard.

Done.

This is how to use Obdstar X300M Cluster Calibration Tool to adjust Benz W204 meter successfully. Quite an easy job!

www.obdexpress.co.uk