JMC R7F701009 Airbag Reset Made Simple with OBDSTAR P50

 This is a tutorial on how to reset JMC R7F701009 Airbag with OBDSTAR P50 on Bench. Read this article carefully to learn how easy it works.

Accessories Required

P50 Airbag Reset Tool

Main Cable

P004 Jumper + Adapter

JMCR7F701009 Airbag ECU

*Make sure OBDSTAR airbag reset tool is in charging and communication in the whole process.

Operating Steps

Airbag reset >> airbag reset >> Latest version >> Brand >> FOTON >> FOTON J38580738-P1360010011A0(CONTINENTAL) R7F701009[BENCH]

Press "Guide"&"Pinout" to check connection instruction.

Connect harness according to the wiring diagram.

After successful connection.

Turn on ignition >> Start >> OK

Here we can check ECU info, read DTC, erase DTC and erase crash.

Click "ECU Information" to check if the airbag part number is correct.

Click "Read DTC".

There are lot of crash fault codes. And we can't execute the "Erase DTC" function.

Click "Erase Crash".

Erase crash success. Please disconnect the 12V power supply and wait for 30s, and then reconnect the 12V power supply.

Click "Erase DTC".

Erase DTC success.

Go back to read DTC.

The crash fault codes were gone! Airbag reset has done.

www.obdexpress.co.uk

Programming Benz SIM271DE with OBDSTAR DC706

 Mercedes-Benz SIM271DE ECM read and write with OBDSTAR DC706 ECU Tool on bench perfectly. Only 2 mins!

You need a main OBD cable, OBDSTAR P004 Adapter and ECU Clone Jumper, 12V power supply to work with DC706 device.

Supply power to DC706, and keep charging and communication throughout the whole progress.

This function is available by connecting the server. Ensure the internet connection is normal during the process.

1.Connect device and Benz ECM

Select ECU Flasher>> ECM>> ECM newest software (i.e.ECM V30.28)>> BRAND>> BENZ

There are only 2 options. Select the correct menu based on the make and model on the ECM module.

Here select BENZ CONTINENTAL SIM271DE TC1796+ST95128 (BENCH)

Click Guide at the bottom left to check the best detection method

Click Pinout to check the wiring diagram and follow it to connect P004 Adapter and Benz ECM via OBDSTAR P004 ECU Clone Jumper

And then connect to DC706 ECU Tool via main cable

After connection, turn on the switch button on OBDSTAR P004 Adapter, and start to perform the read and write operations.

2.Read and write Benz ECM

Click "Connect" to verify security and connect ECU according to the prompts

Read INT eeprom (ST95128) and INT flash (TC1796) separately, and save the corresponding data file

Use the same connection method to connect OBDSTAR DC706 and a new Benz SIM271DE ECM

Then load the corresponding external data (EEPROM & Flash) to write into the new ECM

The write operation is completed, click disconnect to exit the system.

Done!

www.obdexpress.co.uk