OBDSTAR DC706 ECU Tool can clone Volkswagen DL501GEN2 TCM by bench mode. Besides, it also supports to clone VW DQ200, DQ250, DL382, DQ400E, DQ380, DQ381, DQ500 and 8HP TCM. Details please check below table.
OBDSTAR DC706 VW TCM Coverage
Accessories
Main cable
P004 ECU clone jumper
P004 adapter
VW DL501GEN2 TCM
Operation
Power on DC706.
Make sure DC706 is in charging & communication during the whole process.
ECU Flasher >> TCM >> Latest version >> Brand >> VW >> VW TEMIC DL501(0B5)DL501_Gen2 TC1784(BENCH)
Or you can directly enter the ECU model for quick selection.
Click "Guide"&"Pinout" to get connection diagram.
Connect all harness according to the instruction and wiring diagram.
Once completed, click "Start >> Connect" to start cloning.
Turn on the ignition on P004 adapter.
The ECU is connected successfully.
Now we can read & write eeprom, EXT eeprom and INT flash.
Check the log on the left side of screen to see the saved data path.
When ECU clone is completed, remember to click "Disconnect" to exit.
No comments:
Post a Comment