Autel MaxiIM IM508 + Obdstar 30PIN Cable is able to add a new key for 2023–2024 Toyota BZ4X without pincode by OBD. The Toyota-30 Cable is a fairly new cable from Obdstar that allows to do 4A/8A-BA key programming without pincode. Surely we could also have TechStream or find the third party to pay for that codes.
Generally, Toyota-30 cable is designed for Obdstar X300 DP Plus & X300 Pro4, but it also works with Autel. Here I have a factory key and a new key, next I'll demonstrate how to add a new key to this vehicle.
Pop airbag out to find the 30PIN port, plug in Toyota-30 Cable.
Then connect with Autel IM508.
IMMO >> Auto detect >> Toyota(Asia) >> OK >> OK >> Control unit >> Keyless system(CAN) >> Back up IMMO data
This function is used to back up EEPROM data of the smart main ECU, which can be used to perform IMMO related function without PIN.
This function supports models with 8A-BA smart key as of 2022(equipped with TMLF19D smart main ECU).
Press "Yes" to continue.
Ensure that the network connection of the device is good.
Turn the ignition off, and turn the hazard warning lamps on and off once.
Press "OK".
Reading EEPROM data…
Save EEPROM data file.
Add smart key >> Start
This function serves to learn keys. Please complete the steps within specified time.
Turn on the ignition.
Press "OK" to confirm VIN.
Have you backed up the EERPOM data of this vehicle? Yes
Select the saved file.
Reading PIN succeeded.
Keep a learned key close to the start button.
Learning succeeded.
Test the new key.
It does work. That's perfectly done.
BTW, this is 2023 Toyota BZ4X electric vehicle, and I've also done on 2024. it's not problem for Autel to handle it.
Read also:
OBDSTAR Toyota-30 Cable for 4A/8A-BA Add Key & All Keys Lost
No comments:
Post a Comment